Pickups that haul loads or pull a trailer work their brakes harder than a car that only carries people. We handle truck brake service at your home or job site, with a price before we start.

Call 817-709-1357 Text us Request a work order

Call hours: Mon to Fri 7:00 AM to 8:00 PM · Sat 9:00 AM to 4:00 PM

Brakes in Haslet

Brakes on trucks that haul and pull trailers

Weight is what wears brakes. A half-ton pickup with a loaded bed, or a three-quarter-ton pulling a camper or equipment trailer, turns a lot more energy into heat every time it stops. That heat wears pads sooner and can glaze them or leave uneven deposits on the rotors, and you feel it as shaking in the pedal or longer stops.

Our founder maintained heavy fleets for a large construction company, mostly Fords from light pickups up to heavy-duty models, so working trucks are familiar ground. We can do pads and rotors on your truck in Haslet at the house or the job site. When you call, mention how much weight the truck usually carries or pulls.

Ready to get it looked at? Call or text 817-709-1357 and you will hear the price before any work starts.

How it works

Getting truck brakes done where the truck sits

Call or text with the year, model, and engine, plus what the truck hauls day to day. We come out to the house, your yard, or the job site and inspect the brakes where the truck is parked.

Before a wrench turns, you get a price for the work we recommend. Pads and rotors are replaced on site once you say yes. If the truck is a fleet unit, or several trucks need attention, we can schedule them back to back so each one is out of service for as little time as possible.

Warning signs

Signs a working truck needs brake service

Longer stops with a load

Pads may be worn or glazed from heat and no longer gripping well.

Shaking pedal on a long downhill

Rotor surfaces worn uneven, often from heat, make the pedal pulse.

Burning smell after a hard stop

Overheated pads, sometimes from a brake that is dragging.

Truck pulls while braking with a trailer hooked up

One side may be grabbing harder from uneven wear.

Grinding from the rear

Rear brakes on a truck that often carries weight can wear sooner than expected.

Engine work in progress under the hood of a truck

Why Day's

Shop-level work, where you park.

We bring dealer-level diagnostic tools, including a lab scope and a thermal camera, to wherever your vehicle is parked.

Fords are our specialty, built on years of maintaining a construction company's fleet, from cars and light trucks to heavy-duty work trucks.

About Day's

See us on Google

Around Haslet

Have truck brakes checked before a heavy load

If the truck is hauling soon and the brakes already feel weak, noisy, or shaky, get them checked first. Extra weight makes every brake problem worse, and hot, worn brakes fade right when you need them most. When you call, have the truck's year, its usual load, and the date you next need it, and we will plan around that.

We cover all of Haslet

Your driveway, your work lot or the roadside, anywhere in Haslet. Call or text with the year, make and model and what the vehicle is doing.

Call 817-709-1357

Questions

Brakes questions from Haslet.

Do you work on heavy-duty pickups?

Yes. Heavy-duty trucks were a regular part of our fleet work, and most of those were Fords. Fords are our specialty, and we work on other makes too. Tell us the model and what the truck carries when you call or text, and we can plan the job.

Can you do brake work at a job site in Haslet?

Usually, as long as the truck is on firm, level ground with room to get at each wheel. A gravel pad works if it is solid. Let us know where the truck will be parked and we will confirm it works before we head out. Text the location to set it up.

Why do truck brakes wear out sooner when I haul?

Stopping more weight takes more friction and makes more heat. Pads wear down sooner, and repeated hot stops can glaze pads or leave uneven spots on the rotors. Using a lower gear on long grades takes some load off the brakes. If you haul often, have them checked more often, and call or text when you want an inspection.

Can you service several company trucks at once?

Yes. We do fleet maintenance for company work vehicles, and brake service fits into that. We can line up several trucks in one visit so your crew loses as little time as possible. Send us the list of units and what each one is doing, and we will build a schedule.