Menu
Services
Diagnostics and electrical
Check Engine Light Diagnostics
Heating and cooling
Brakes and suspension
Maintenance
Onsite and fleet
Service areas
Keller
Haslet
Watauga
Roanoke
Trophy Club
Saginaw
North Richland Hills
Colleyville
Southlake
Haltom City
Company
Fort Worth, TX and surrounding cities
Mobile Serpentine Belt and Hose Replacement in Fort Worth, TX
Belts and hoses wear out slowly and then fail all at once. We check them where your vehicle is parked and replace worn ones before they leave you stranded.
Call hours: Mon to Fri 7:00 AM to 8:00 PM · Sat 9:00 AM to 4:00 PM
Belts and Hoses
Rubber parts wear out on their own schedule
The serpentine belt is a single long belt that drives the alternator, the AC compressor, the power steering pump on many vehicles, and often the water pump. When it breaks, several things stop together. The battery stops charging, the steering can get heavy, and on many engines the coolant stops moving, so the temperature climbs.
Coolant hoses carry hot, pressurized coolant between the engine, the radiator and the heater core. Every heat cycle hardens the rubber a little from the inside. A hose can look fine and still be soft, swollen or cracked where you cannot see it, and when one splits, the engine loses coolant in a hurry.
Swapping a worn belt or hose ahead of time is a small job. Waiting until one fails can mean a stranded vehicle and sometimes an overheated engine. We check belts, tensioners, pulleys and hoses at your home or work in Fort Worth and tell you what is worn and what still has life left. Call or text and we will look them over.
Quick facts
Where
Your home, work or roadside in Fort Worth
Price
Given before any work starts
Call hours
Mon to Fri 7:00 AM to 8:00 PM · Sat 9:00 AM to 4:00 PM
Reach us
Call or text 817-709-1357
Warning signs
Signs a belt or hose is wearing out
Squeal at startup or with the AC running
A glazed or loose belt, or a weak tensioner.
Cracks across the ribs of the belt
The rubber has aged and the belt is near the end of its life.
Chirping or a wobbling pulley
A worn tensioner or idler bearing that can throw the belt off.
Coolant puddles or crusty residue at the hose ends
A slow leak at a connection or clamp.
Hoses that feel spongy, swollen or brittle
Rubber breaking down from heat, even when the outside looks fine.
How it works
Getting worn belts and hoses replaced
Send us a text with the vehicle and what you are hearing or seeing. A short video of the squeal with the hood open helps a lot. We pick a time when the vehicle will be parked and the engine can cool down.
We look over the belt, the tensioner and each pulley, then squeeze and inspect the coolant hoses and clamps. If something is worn, we show you and quote the replacement before doing anything. A belt or a hose can usually be replaced on the spot. When a hose job means draining and refilling coolant, we bleed the air out of the system so the engine does not run hot afterward. If several parts are due at once, or one has to be ordered, we schedule the work for a time that suits you.
When to call
When to stop and call
A squealing belt can usually be driven for a short while, though it is warning you. A belt that is missing chunks, fraying at the edges or flapping is close to breaking, so keep trips short. A leaking hose is more urgent. If you see steam, smell hot coolant or watch the temperature gauge climb, pull over and shut the engine off, since driving hot can warp a cylinder head. Then call or text and let us know where the vehicle is.
Why Day's
Shop-level work, where you park.
We bring dealer-level diagnostic tools, including a lab scope and a thermal camera, to wherever your vehicle is parked.
Fords are our specialty, built on years of maintaining a construction company's fleet, from cars and light trucks to heavy-duty work trucks.
Where we work
Belts and Hoses around Fort Worth.
Questions
Belts and Hoses questions.
How long does a serpentine belt last?
It depends on the vehicle, the heat it sees and how many accessories the belt drives. Your owner's manual lists a replacement interval, and the belt's condition matters as much as the mileage. We check for cracks, glazing and rib wear and tell you whether it is due. Text us and we can include it in a visit.
Should the tensioner be replaced with the belt?
Not always. A tensioner with a weak spring or a noisy bearing will wear out a new belt early, so we check it while the old belt is off. If it is worn, you get a price for both before we go ahead. Mention any chirping or rattling when you call.
What causes a coolant hose to fail?
Heat, pressure and age. Each time the engine warms up and cools down, the rubber flexes and slowly breaks down. Oil dripping onto a hose speeds that along. The weak spot is often under the clamp or on the inside, where it stays hidden. Call or text if you notice coolant on the ground.
Can a broken belt damage the engine?
On engines where the serpentine belt drives the water pump, a broken belt stops coolant flow and the engine can overheat within a short drive. The battery also stops charging, so the vehicle will die once the battery runs down. If the belt breaks, stop driving and text us where you are.
Can belts and hoses be replaced at my house in Fort Worth?
Yes. Belt and hose jobs are typically done right where the vehicle sits, at a house or in a work lot. Hose work goes best with a cool engine, so let us know when the vehicle will have been parked for a while. Call or text to set a time.
Get a price
Tell us what the vehicle is doing and where to find it. The price comes first, then the repair.
Call hours: Mon to Fri 7:00 AM to 8:00 PM · Sat 9:00 AM to 4:00 PM